Do you have room that might benefit from a ceiling fan Its not complicated to install a ceiling fan by yourself if you are preparing to replace a light fixture. Because a ceiling fan must have the same electrical wiring as your light fixture, the only primary thing that really needs to be done is to replace the workbox that can manage the weight of the ceiling fan. It would be very deadly if you do not replace your current workbox to something that can manage the added weight of the ceiling fan. good woodworking ideas Before you do anything, read the manuals for your fan very carefully and make sure that you have the needed tools.

If you plan to put in the fan at a cathedral type ceiling, then you may need to get parts to prolong the fan lower. When you have every little thing ready to go, the foremost thing you must do is make sure that the breaker is switched off so no power goes to the light fixture. The moment you take out the light fixture, check to see if the current workbox can cope with the added weight. Generally they aren't designed for a ceiling fan, so you will have to add more more support. You can do this really easily if you are able to access the light fixture from the attic.

To add new support, you simply nail a 2x4 involving the ceiling rafters in order that it touches the top of the workbox. Make sure that the 2x4 is anchored and then screw on the box to the wood. If you did it correctly, the weight of the fan must be well supported by the 2x4 wood and screws. If you dont have admission to the attic, you will need to place a cross bracing in your ceiling. Performing this is much more of a challenge and may not be as secure as using a 2x4 but it is the most suitable you can do if you dont have access to the attic.

So now, after constructing the fan according to the instructions, you are prepared to put the new fan. The tough part is holding the fan, while hooking up the wiring. The difficulty is based on the kind of fan you get, whether it is a draping frame or a fan that has a bracket with a J hook. Most of fans employ a chain to operate the speed of the fan and the wall switch turns the unit on or off. If you also establish a light kit with the fan, each can be operated by a wall switch or chain.

Electrical wiring the fan is as simple as connecting two black wires, two ground wires and two white wires. Now all you want to do is finish assembling the fan according to the directions, by attaching the fan blades. woodworking blueprints Right after you install the blades, the only thing left is to flip the breaker back on to find out if you did it right.